This is a great way to get ideas, see beautiful spaces, and learn who can help improve your home locally!

Here is another case of a little addition that accomplishes big things for the homeowner.

This historic home needed a list of improvements on the first floor: an updated kitchen, dining area, laundry area, three-quarter bath, and a back entry that fits the architecture. It also came with a list of challenges: limited site area, finished space above (hinders plumbing routes), and a limited budget.

Our solution added only about 100 square feet of heated space, plus an entry porch. Through creative use of space and spatial definition strategies, we added everything on the owner’s wish list, plus a tiled entry and closet. The owner is very pleased with the results. Here is part of an e-mail I received from them last week:

I’ll have to add that {we} are absolutely delighted with your vision of what could happen in an addition. We keep chuckling about the fact that we came close to having an attached outhouse and now we has a lovely kitchen, laundry area and bath.

Small, carefully planned additions can help your house fit better without breaking the bank. We can help with vision and implementation, and we welcome your call.

Owatonna has a great architectural treasure. On a recent visit I stopped here, at the old National Farmer’s Bank Building. Designed in 1908, by Chicago architect Louis Sullivan, this bank has been called the most beautiful bank in the world.

It is a carefully proportioned building, whose apparent design simplicity is enhanced by terra cotta tiles inside and out. It is a pleasure to view and visit, awash with natural light inside and richly embellished in every detail.

Tours are available regularly, or you can just drop in during banking hours. Here is a PDF with more details.

Celebrate American architecture with a visit to Owatonna!

We northerners want to get our construction projects enclosed before then, to save money on temporary heat, frost removal, snow removal, and temporary enclosures. Summer Solstice means four to five months, hopefully, before serious snowfall. If you haven’t started planning your addition or remodeling and hope to beat the winter weather, now is the time!

Summertime planning with a September construction start will usually wrap up your building’s exterior for the winter, allowing time during the chilly months for interior finishing and occupancy. Wouldn’t it be nice to celebrate Christmas in your new addition?

Natural stone is being replicated using this technology. By combining different ink jet printing and different glazing, greater depths and texture can be achieved, making the tiles look even more like real stones. Ink jet is also better at accommodating surface texture on the tile and can randomize the patterning (so you can’t see an obvious repeat on the tiles.) Printed “stone” is useful for commercial installations where a natural stone would be beautiful but not long-wearing or may be difficult to maintain.

Because the tiles are printed right on the production line with computer control, small batches can be provided with quick turn-around. This gives the consumer amazing control. Previously, small batch productions were very costly and had a long lag time. Because of this, tile distributors ordered in large quantities then had to pay to warehouse the tile.

How could you really push the envelope on this technology? My first thought was corporate identity: it would be interesting to have a logo or other company imagery printed right into the tile used in its offices. How about reproduction tile for an historic project where the tile is no longer available? Maybe we’ll start to see art tile using artists’ images that are duplicated or divided and printed onto individual tiles.

Let us know if you’d like to see this tile and consider it for your own project. We can discuss its possibilities for your application. Plus, you never get a paper jam!

Which of these home improvements do you think can cause condensation on your windows and cause your water heater to back draft?

The truth is that they all have the potential to cause unexpected consequences, including condensation on the windows, carbon monoxide in the air, and mold in the walls.
At the Smart Remodeling seminar in Rochester, we reviewed the interdependence of the systems in the house and how well-intentioned upgrade can cause a snow-ball effect in pushing an existing house toward and over the cliff to failure.

Why?

All of our existing homes rely on energy to keep them stable and to manage moisture. Older homes may be stable for reasons that aren’t immediately obvious. For example, wood fireplaces traditionally allow a high volume of air to escape through the chimney. That air may actually be removing moisture from the basement in the spring. If you install tight doors over the fireplace and the air is not allowed to escape, what happens to the moisture? It stays in the house, causing odors, mold, and condensation, unless overall ventilation of the house is addressed at the same time. The same holds true for other seemingly innocuous renovations.

The improvement ideas in the pop quiz above are all great things to do for energy efficiency and sustainability, yet experience has shown that they can lead to unintended results. These can be prevented through the right analysis and design process. We invite your call to discuss how careful planning can keep your remodeling project on track and improve your home’s performance at the same time.

If you are a builder or supplier in our area and would like information on how you can participate, please feel free to call or email me for more information.

Watch the Northfield Entertainment Guide, redoux home magazine and other media for upcoming information on the tour.

This tour is being organized by Vivus and Schmidt Homes Remodeling of Northfield. Call or email for more information and we look forward to seeing you on the tour!

We had the opportunity over spring break to tour a project we’d designed a couple of years ago. It was a walk-out basement on Circle Lake that needed finishing. When the house was designed and built, not much forethought was given to the basement layout and the proposed floor plan just wasn’t going to work well for the owners. A complication was the plumbing: the rough-ins weren’t exactly where we’d have liked them, and the radiant in-floor heat made tearing up the floor (to relocate the plumbing) a poor solution.

In the end, we found a way to get the bar where we wanted it and worked around the plumbing issue. 3-D computer modeling brought the possibilities to life, allowing the owners to understand the flow of the rooms, the sight lines and creative finishes. They now have a stunning entertaining space, two kids’ bedrooms and shared bath, a game room and a bathroom easily accessible from the outdoors for their lower level.

The bar is certainly the focal point, and the owner set the stone and tile himself. A skilled mason, the work echoes the stone on the home’s exterior, which blends the inside and outside, making a great visual as well as physical connection. Taking the time to do things right is evident in this project: the granite countertop was custom fabricated, the slate tile was laid in a pattern, and all the stone layouts were planned before setting began. Left to do: appliances and a game table.

Not every homeowner has the skills or time to install so much of their own project. We can help you decide how much you’d like to tackle and then we’ll help find craftspeople to do the rest. And we’ll get them the drawings and information they need to understand the vision we created together.

Watch the “portfolio” section of our website as we add more photos of the project. And let us know how we can help you.

VIVUS Architecture + Design has renewed its membership in the US Green Building Council as an indicator of our interest in , expertise regarding, and support of the sustainable building movement in the United States.

Ask us how we can help you measure how sustainable your project can be!